인쇄 잉크 용 염소화 폴리 프로필렌 CPP 수지
담당자 : Jack
전화 번호 : 0086-13955140199
WhatsApp : +8613955140199
상세 정보 |
|||
원래 장소: | 안후이, 중국 | 재료: | 아크릴 |
---|---|---|---|
색: | 백색 | 애플리케이션: | 판지 기타 등등, 종이에 플라스틱 박막을 적층합니다 |
PH 값: | 6-8 | 독성: | 독성 없음 |
포장: | 50kgs, 200kgs, 1000kgs/Drum | HS는 코드화됩니다: | 3506919090 |
주문 제작된 등급: | 고체 함량은 37%에서부터 47%까지 조정될 수 있습니다 | MOQ: | 500KGS |
이명: | 물 기반을 둔 아크릴 건조 라미네이션 점착성 글루 | 타입: | 엷은 조각 모양 접착제, 기초가 되는 것으로 급수됩니다 |
하이 라이트: | 500kgs Dry Lamination Adhesive,Acrylic Ester Dry Lamination Adhesive,BOPP Film Dry Lamination Adhesive |
제품 설명
Water Based Acrylic Dry Lamination Adhesive glue For Paper to Plastic Film
Basic Info
Characteristic | Water Based |
Composition | Acrylic Ester |
Color | White |
Shelf Life |
6 Months |
Packing | 50kgs, 200kgs, 1000kgs/Drum |
Advantage | Save Glue Usage Compare to Vae Glue |
Advantage 2 | Easy to Chean The Machine After Use The Glue |
Application 1 | BOPP/Pet Film on Paper |
Application 2 | Carton Packing |
c | 500kgs |
Trademark | elite indus |
Origin | China |
HS Code | 3506919090 |
Customized Grade | Solid Content Can Be Adjusted From 37% to 47% |
pH Value | 5.0-7.5 |
Main Agent Composition | Acrylic Ester |
Toxicity | Non Toxic |
Free Sample | Below 400g by Express |
Brief introduction:
It is benzene/toluene free water based acrylic polymer emulsion adhesive designed for dry bond /heat seal laminating process.
Dry bond lamination is the process of coating the adhesive to plastic film,
drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate(paper/paper board/cardboard etc..)
via a heat compression nip.
It is mono-component adhesive with very good adhesion to flexible film .
We offer different viscosity adhesive, to meet slow, middle and high speed machine,
it can be used for manual, semi-auto, automatic and high speed full automatic lamination machines.
Advantage:
1. Lower consumption than oil / solvent based lamination adhesives.
2. water based adhesive, free of toluene, eco-friendly.
3, Easy to clean the lamination equipment.
4, can be use for highest speed automatic dry lamination machine.
Specification Data sheet:
Type | Solid content | Features | Technical Parameter |
D1001 D1002 D1003 |
37%-42% | 1, Good surface effect, good brightness and good composite fastness 2, apply for higher speed lamination 3, Less glue consumption, reduce production cost 4, most suitable for common cartons of fruit, food etc... without embossing |
1, Appearance: white emulsion 2, Viscosity (MPA.S):100-1000 3, PH value: 6.0-8.0 4, Storage: 6 months 5, Toxicity: non toxic |
D2001 D2002 D2003 |
37%-42% | 1, Good surface effect, good brightness and good composite fastness 2, apply for higher speed lamination 3, Less glue consumption, reduce production cost 4, most suitable for PET film to paper ... without embossing |
|
D3003 D3005 D3007 |
42%-47% | 1, Excellent powder cover ability, and composite fastness 2, High brightness and high speed lamination 3, very good effect for processing after lamination, such as partial embossing, heavy embossing, heat embossing etc... 4, suitable for double side lamination, gold/silver card paper lamination. |
|
D5001 D5002 D5003 |
37%-42% |
1, special use for high speed lamination process. 2, lower adhesive consumption, reduce production cost 3, suitable for high speed lamination machine, such as milk box, carton etc.. without embossing process. |
Application:
For laminate/bond plastic film like PET, BOPP, MPET to paper, paper board, duplex board.
Suit for manual, Semi-Auto and Automatic machines.
Components: Acrylate copolymer
Suggestion and Notice:
Suggestion:
1, Before lamination, raise the temperature of the laminating machine roller to 95-110ºC, the temperature of the drying tunnel to 80-95ºC.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive disperse on roller evenly,
The amount of adhesive consumption shall be flexibly adjusted according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95ºC, the roller pressure shall be around 6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film and connections.
Notice:
1, Clean the adhesive tank and roller before use our adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;
5, Better make testing for with film or paper, before mass production, to check the color retention or bonding strength.
Packing & Delivery:
50kgs/drum 200kgs/drum 1000kgs/IBC
20650kgs/1x20'gp without pallet. 16000kgs/1x20'gp with pallet. 20000kgs /1x20'gp.
13500kgs/1x20'gp with pallet.
당신의 메시지에 들어가십시오