콘크리트 철근을 위한 폴리프로필렌 폴리머 종합적 대형 섬유
담당자 : Jack
전화 번호 : 0086-13955140199
WhatsApp : +8613955140199
상세 정보 |
|||
원료: | 폴리프로필렌 | 섬유형: | 모노필라멘트 |
---|---|---|---|
산성 &Alkali 저항: | 강한 | 융해점 (C Deg.): | 160 - 170 |
상품 이름: | 콘크리트 철근을 위한 PP 단일 필라멘트 폴리프로필렌 미세 파이버 | 균열 신장: | 20+/-5% |
하이 라이트: | 모노필라멘트 폴리프로필렌 극세사,고분산 폴리프로필렌 극세사,모노필라멘트 pp 극세사 |
제품 설명
PP monofilament Polypropylene micro fiber for concrete reinforcement
—Monofilament Form
Polypropylene micro fiber PROPERTIES:
Our PP fiber monofilament was produced by advanced technology for fiber spinning, modified by adding functional additives and special surface-treating.
Mixing into cement concrete, mortar, plaster etc...,
it has many advantages such as good dispersing, better water affinity, strong linking force.
It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc…..
Polypropylene micro fiber SPECIFICATIONS:
Raw Material | Polypropylene | Crack Elongation | 20+/-5% |
Fiber Type | monofilament | Fiber Diameter | 20um-30um |
Melting Point(C Deg.) | 160 - 170 | Density(g/cm3) |
0.91+/-0.01
|
Acid &Alkali Resistance | Strong | Tensile Strength(MPa) | 450 min. |
water absorbency |
NO
|
Length: |
Times of 4mm or 6mm |
Normal length |
4mm, 6mm, 8mm, 12mm,18mm, 24mm, 30mm etc... (times of 4mm or 6mm with 1mm more or less ) |
Polypropylene micro fiber Feature & Function:
1. Easy to be dispersed in mortar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively.
2. Easy to be used: No need to change the proportion of mortar, just put the fibers into the mortar mixture and stir for a moment after adding water.
3. It with fine economic property: The equivalent diameter of PP Fiber monofilament is only φ 0.02-0.03mm, so the ratio of diameter and surface area is high and on the basis of crack resistance, it can reduce the amount (to about 0.6-0.9kg/m 3 ).
4. Easy to plaster: As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.
5. It with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
Applications:
A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool,pond and ditch.
D). Suit for any mortar projects and common concrete projects.
E). Highway, bridge and other roads.
Applying Instruction:
A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough, and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.
B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together,then stir after adding enough water and time for stirring can be prolongedfor 2~3 minutes in order to make the compound mix completely.
Also it can be mixed with cement and other aggregates in advance,stirring by adding water at worksite before construction.
PACKING: normal packing is 0.6kg, 0.9kg or 1.0kg a pe film bag,
18kgs/carton or 20kgs/plastic woven bag.
Water soluble paper bag is available.
당신의 메시지에 들어가십시오